Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Spring Repair for Apopka Homeowners
A broken spring turns a working garage door into a dead weight in seconds. The door won’t lift, the car is stuck inside, and every attempt to force it risks damage to the opener and injury to whoever tries. Our technicians have up to 8 years of experience with exactly this repair, on the torsion and extension systems that fill Apopka’s homes. Same-day service is the norm for spring failures, and we answer 24/7. Call (844) 558-0733 and we’ll get a trained technician out to get your door moving again.
What Our Garage Door Spring Repair Service Includes
Torsion Spring Replacement
A torsion spring is the coiled steel mounted on the bar above your door, and it does the heavy lifting every time the door opens. When it snaps, the door becomes nearly impossible to raise by hand and the opener will strain or stall. We replace the failed spring and inspect the second spring on the same bar, since a matched pair wears at the same rate and is usually replaced together to keep the door balanced.
Extension Spring Replacement
Extension springs stretch along the sides of the door on older track systems, and they carry the same stored energy as torsion springs in a different form. A stretched or broken extension spring leaves the door lopsided and puts uneven load on the tracks and rollers. We replace the spring and, where the setup allows, add the safety containment that keeps a broken spring from flying.
Broken Spring Repair
Most broken spring calls start with a loud bang from the garage and a door that won’t budge the next morning. The repair means removing the failed spring, matching the replacement to your door’s weight and height, and resetting the tension so the door balances correctly. We handle this directly rather than passing it to a third party, because spring work is the part of garage door repair that carries the most risk.
Spring Adjustment
Sometimes a spring isn’t broken, just out of tune. A door that drifts down on its own, slams shut, or feels heavy mid-travel usually needs the tension adjusted rather than a full replacement. We measure the door’s balance and set the springs so the door holds position at halfway and opens smoothly through the full cycle.
Safety Cable Installation
Safety cables run through the center of extension springs and are the backup that keeps a broken spring from becoming a projectile. On older doors these cables are often missing, rusted, or attached with hardware that’s seen better days. We fit proper cables so the spring has somewhere to go if it ever fails.
Spring Inspection
Springs give warning before they break: a visible gap in the coil, a stretched section, rust at the winding cone, or a door that’s started to feel heavier than it used to. A spring inspection checks the coils, the center bearing plate, and the balance of the door as a whole. If the springs have life left in them, we’ll tell you and leave them alone.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Spring Repair
Spring systems come attached to doors and openers made by specific manufacturers, and knowing how each one is put together saves time on the repair. We work on LiftMaster and Chamberlain openers regularly, and we know how their travel limits and force settings interact with a door whose springs have just been replaced. A door that ran fine on worn springs will often need its opener limits reset after the new springs go in, and that’s part of the job for us.
We also service Craftsman and Raynor equipment, along with Clopay, Amarr, Genie, and Wayne Dalton. Each brand has its own habits: where the springs sit, how the drums are cut, how the door is balanced from the factory. Whether you have a Craftsman door from a builder or a Raynor system that’s been maintained for years, we can help.
Signs You Need Garage Door Spring Repair Right Now
- A loud bang from the garage. That sound is usually a torsion spring snapping, and it often happens while no one is in the room. The door will feel extremely heavy the next time you try to lift it, and the opener may hum without moving the door.
- The door won’t open, or opens a few inches and stops. This is the classic broken-spring symptom. Forcing it further can burn out the opener motor or bend the door panels, so it’s better to leave it down and call.
- A visible gap in the spring coil. Look at the spring above the door for a clear separation in the coils. That gap means the spring has failed, even if the door still opens partway.
- The door feels heavy when lifted by hand. A balanced door should lift with one hand and stay put at halfway. If it takes real effort, the springs have lost tension and the opener is doing work it wasn’t built for.
- The door drifts down on its own or slams shut. This points to spring tension that’s out of adjustment rather than a break. It’s still worth fixing soon, since a door that falls unexpectedly is a hazard to anyone standing underneath.
Our Garage Door Spring Repair Process – Step by Step
- 1
We ask what happened on the phone. Describing the sound, whether the door moved at all, and what kind of door you have helps us bring the right springs on the first visit. It also lets us flag anything that sounds like a safety issue before we arrive.
- 2
We inspect the whole system, not just the spring. That means the springs, cables, drums, center bearing plate, rollers, and the opener’s force settings. A snapped spring sometimes takes a cable with it, and we’d rather find that on the inspection than after the door is back in service.
- 3
We give you a written estimate before any work starts. The price is quoted and agreed before we touch the door. If we find something else that needs attention, we show you and explain it, and you decide.
- 4
We replace the spring and reset the balance. The door comes off the opener, the old spring is removed with proper winding bars, and the new spring is matched to the door’s weight. We then run the door by hand to confirm it balances at halfway before reconnecting the opener.
- 5
We test the full cycle and reset the opener. The door runs open and shut several times, the safety reverse is checked, and the opener’s travel and force limits are set for the new springs. You get a door that works the way it should, and we walk you through what we did.
A word on safety: torsion and extension springs hold enough stored energy to cause serious injury, and the winding process is where most garage door injuries happen. This isn’t a repair to attempt with hand tools and a video. A trained technician uses the right winding bars and knows how to release tension safely. If your spring has broken, leave the door down and let us handle it.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Spring Repair Cost in Apopka?
A typical spring repair in Apopka runs $180 – $340 for one spring. That range covers the spring itself, the labor to wind and set it, and the balance check that follows. A matched pair is usually replaced together because both springs wear at the same rate, so a pair costs about twice the single-spring range. The written estimate sets the final price, and we quote it before any work begins.
What moves the number within that range: the type of spring (torsion versus extension), the door’s height and weight, whether the cables and drums need attention at the same time, and whether the opener needs its limits reset. Cable repair, when it’s needed alongside a spring, runs $130 – $250. If the inspection turns up a track or roller problem, those are quoted separately so you can see exactly what each item costs.
To avoid overpaying, ask for the estimate in writing before work starts and make sure it lists the spring, the labor, and any related parts. Our estimates are free, and they include the inspection that tells you whether you need one spring or a pair. Call (844) 558-0733 for an exact quote.
Garage Door Spring Repair Near Apopka – Our Service Area
We cover spring repair across Apopka and the surrounding communities, including Zellwood, Mount Plymouth, Tangerine, Mount Dora, Winter Garden, Oakland, Eustis, Minolea, Tavares, South Apopka, and Clarcona. Response times depend on where you are and how the day is running, but spring failures get priority because a stuck door blocks the car. If you’re outside Apopka proper, call and we’ll confirm timing. You can also read more about our Apopka Garage Door Repair Pros for the full range of door and opener work we handle.
Serving Apopka, FL – Our Local Coverage Area
We serve Apopka and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Spring Repair in Apopka
Garage door spring repair is the replacement or adjustment of the springs that counterbalance the weight of the door. Torsion springs sit on a bar above the door and twist as the door moves; extension springs stretch along the sides on older systems. The repair restores the door’s balance so the opener only has to guide it, not lift it. It’s the most safety-critical part of any garage door service, which is why we handle it directly.
Most single-spring replacements take about an hour to an hour and a half once we’re on site. A matched pair takes a bit longer, and if the inspection turns up cable or drum damage, add time for that work. We give you a realistic window when you call so you’re not waiting around. Same-day service is common for spring failures.
A typical spring repair in Apopka runs $180 – $340 for one spring, with a matched pair costing about twice that range. The exact price depends on the spring type, the door’s size and weight, and whether related parts need attention. The written estimate sets the final price, and there’s no charge for the estimate itself. Call (844) 558-0733 for an exact quote.
Yes, we service LiftMaster and Chamberlain openers, along with Genie, Craftsman, Clopay, Amarr, Wayne Dalton, and Raynor. Spring replacement often requires resetting the opener’s travel and force limits afterward, and we do that as part of the repair. One call covers the door and the opener, so there’s no back-and-forth between contractors.
Same-day service is available for spring failures, and spring work gets priority on the schedule. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday; we’re closed Saturday. If you call outside dispatch hours, we’ll book you into the next opening.
We stand behind our work, and we’ll walk you through what’s covered before we start, so there’s no guesswork. Warranty terms depend on the parts used and the specific repair, so ask when you book and we’ll explain it in plain terms. What we won’t do is promise something we can’t back up.
Leave the door closed and don’t try to force it open; a door with a broken spring can fall or damage the opener. Clear the area in front of the door and the path to the garage so the technician can work safely. If you know the door brand, the opener brand, or roughly how old the springs are, that helps us bring the right parts. Then just call (844) 558-0733 and we’ll take it from there.
Schedule Your Garage Door Spring Repair Service in Apopka Today
A broken spring doesn’t fix itself, and every day the door sits stuck is a day your car stays trapped. Call (844) 558-0733 for a free estimate on spring repair in Apopka. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. The price is quoted and agreed before any work starts, so there are no surprises when the job is done. We’ll tell you honestly whether you need one spring or a pair, and we’ll fix what needs fixing.
Written by the team at Apopka Garage Door Repair Pros.